Alero L4-144 2.4L DOHC VIN T SFI (2000)
9. Use the J2619-01 and the J33008 in order to remove the right side axle shaft.
10. Perform the following steps in order to separate the left side axle shaft (1) from the transaxle (2):
^
Place a flat - bladed screwdriver into the groove provided on the axle shaft tri-pot joint.
^
Use the flat - bladed screwdriver in order to separate the left side axle shaft (1) from the transaxle (2).
11. Remove the axle shaft (1) from the vehicle.
Installation Procedure
1. Install the axle shaft (2) to the transaxle (1).