Alero L4-144 2.4L DOHC VIN T SFI (2000)
Power Window Switch: Service and Repair
Rear Door Power Window Switch Replacement
REMOVAL PROCEDURE
1. Remove the lower switch bezel trim screw access panel.
2. Remove the lower switch bezel trim screws.
3. Remove the lower switch bezel trim panel.
4. Use a flat-bladed tool in order to pry the rear door power window switch bezel assembly (1) upward.
5. Remove the rear door power window switch bezel assembly (1) from the rear door trim panel.
6. Disconnect the rear door power window switch electrical connector.
7. Release the rear door power window switch retainers.
8. Remove the rear door power window switch from the bezel assembly (1).
INSTALLATION PROCEDURE
1. Install the rear door power window switch to the rear door power window switch bezel assembly (1). Ensure that the retainers are locked into
place.
2. Connect the rear door power window switch electrical connector.
3. Install the rear door power window switch bezel assembly (1) to the rear door trim panel. Ensure that the retainers are locked into place.
4. Install the lower switch bezel trim panel.
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the lower switch bezel trim screws.
Tighten
Tighten the lower switch bezel trim screws to 10 N.m (89 lb in).
6. Install the lower switch bezel trim screw access cover.
