Alero L4-144 2.4L DOHC VIN T SFI (2000)
Wiper Arm: Service and Repair
REMOVAL PROCEDURE
1. Turn the ignition switch to the ACCY position.
2. Set the wiper switch to the PULSE position.
3. Turn the ignition off when the wiper arms are in the innerwipe position and they are not moving.
4. Disconnect the washer hose from the washer nozzle.
5. Remove the cover from the nut.
6. Remove the nut from the wiper arm and the wiper transmission drive shaft.
7. Remove the wiper arm from the wiper transmission drive shaft by rocking.
8. Remove the wiper blade from the wiper arm.
8.1. Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm.
8.2. Bring the wiper arm out through the opening in the wiper blade.
INSTALLATION PROCEDURE
