Alero V6-3.4L VIN E (1999)
Valve Guide Seal: Service and Repair
Removal Procedure
^
Tools Required
-
J 22794 Spark Plug Port Adapter
-
J 5892-D Valve Spring Compressor
-
J 38606 Valve Spring Compressor
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the valve rocker cover.
3. Remove the spark plug.
4. Remove the rocker arm.
5. Install the J 22794 to the spark plug port.
6. Apply compressed air in order to hold the valves in place.
7. Compress the valve spring. Use the J 5692-D or the J 38606.
8. Measure the following items:
^
The valve locks
^
The valve cap
^
The valve spring
9. Remove the valve stem oil seal.
Installation Procedure
^
Tools Required
-
J 5892-D Valve Spring Compressor
-
J 38606 Valve Spring Compressor
1. Install the valve stem oil seal. Use the plastic sleeve provided. Press the oil seal over the valve guide boss.
2. Assemble the following items:
^
The spring seat
^
The valve spring
^
The valve cap
