oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Front Door Interior Handle > < Front Door Exterior Handle|Service and Repair|Page 12220
Page 3
background image

Notice:  Refer to Fastener Notice   in Cautions and Notices.

3. Install the outside door handle fasteners.

Tighten the fasteners to 7 Nm (62 lb in).

4. Install the lock cylinder rod and arm (2) to the lock cylinder.
5. Install the E-clip (3).

6. Connect the door handle rod to the latch.

1. Insert the rod (1) into the clip (2) on the door latch assembly.
2. Close the clip.

Important:  Inspect for the proper operation of the door handle and lock cylinder before installing the water deflector and the door 
trim panel.

7. Install the water deflector. Refer to Front Side Door Water Deflector Replacement. See: Front Door Panel/Service and Repair
8. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement. See: Front Door Panel/Service and Repair

Front Door Interior Handle > < Front Door Exterior Handle|Service and Repair|Page 12220