Replacement of Front Door Bottom Auxiliary Sealing Strip | Aurora V6-214 35L VIN H SFI (2001)
Front Door Weatherstrip: Service and Repair
Front Door Opening Weatherstrip Replacement
Front Door Opening Weatherstrip Replacement
Removal Procedure
1. Start at the joint at bottom of door opening and pull the weatherstrip away from the door opening flange.
2. Work around the door opening and remove the weatherstrip.
Installation Procedure
1. Position the paint dot in the upper corner of the center pillar.
Important: One paint dot on the weatherstrip indicates RH weatherstrip starting point, and two paint dots on the weatherstrip indicates
LH weatherstrip starting point.
2. Working downward along the rear edge, install the weatherstrip on the door opening flange.
3. From the center pillar corner working forward, install the weatherstrip along the roof rail and the window-pillar flange.