oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Rear Door Hinge|Service and Repair|Page 12289 > < Rear Door Interior Handle|Service and Repair|Page 12285
Page 1
background image

Rear Door Hinge: Service and Repair

Rear Side Door Upper Hinge and Lower Hinge Replacement

Removal Procedure

1. Open the rear and the front doors.
2. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement  See: Rear Door Panel/Service and Repair
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement   (See: Rear Door Panel/Service and Repair).
4. Remove the center pillar garnish molding. Refer to Center Pillar Garnish Molding Replacement   (See: Interior Moulding / Trim/Trim

Panel/Service and Repair/Center Pillar Garnish Molding Replacement) in Interior Trim.

5. Disconnect the door wire harness from the body wire harness.
6. Remove the door wire harness connector (3) from the center pillar.

7. Remove the door check link fasteners from the pillar.

8. Remove the intermediate hinge fasteners (1) from both hinges.
9. Lift the door to remove, with the aid of an assistant.

Rear Door Hinge|Service and Repair|Page 12289 > < Rear Door Interior Handle|Service and Repair|Page 12285