Aurora V6-214 3.5L VIN H SFI (2001)
12. Remove the automatic level control vent tube from the electronic level control compressor.
13. Support the rear suspension support assembly with a transmission jack.
14. Remove the support bracket retaining bolts.
15. Remove the front and rear mounting bolts securing the support assembly to the body.
16. Lower transmission jack and remove the support assembly.
Installation Procedure
1. Raise the support the rear support into position.
2. Install the support brackets at the forward support assembly mounts.
3. Install the forward mount bracket bolts. Do not tighten at this time.
Notice: Refer to Fastener Notice in Service Precautions.
