Aurora V6-214 3.5L VIN H SFI (2001)
Technical Service Bulletin # 01-08-49-010
Date: 010701
Instrument Panel/Console Trim Plate - Removal
File In Section: 08 - Body and Accessories
Bulletin No.: 01-08-49-010
Date: July, 2001
INFORMATION
Subject:
Instrument Panel (IP) Center Trim Plate and Console Trim Plate Removal Procedures
Models:
2001-2002 Oldsmobile Aurora
This bulletin is being issued to emphasize the importance of observing the proper removal/installation procedures to avoid component damage.
Notice:
If the IP Center Trim Plate and Console Trim Plate are not properly removed or installed, damage may occur.
The following information has also been updated within SI2000. If you are using a paper version of this Service Manual, please mark a reference to this
bulletin on the affected page.
Please observe the following procedures when removing or installing the IP Center Trim Plate and the Console Trim Plate.
Disclaimer
Trim Plate Replacement/Installation - IP Center
SI 2000 Document Number 528604
Tools Required
Plastic Trim Tool
Removal Procedure
Notice:
To prevent component damage, DO NOT use metal tools to remove the trim.