Aurora V6-214 3.5L VIN H SFI (2001)
1. Install the rear seat back into the car.
2. Align the rear seat back retainer clips with the slots on the cross car beam.
3. Push in firmly on the rear seat back in order to engage the rear seat back retainer clips.
4. Position the rear shoulder belts over the seat back.
5. Position the center shoulder belt over the rear seat back.
Notice: Refer to Fastener Notice in Cautions and Notices.
Important: Ensure that the fastener threads and fastener holes are free of any sealer patch material.
6. Install the rear seat belt buckle and center shoulder belt anchor fasteners.
Tighten the fasteners to 41 Nm (32 lb ft).
7. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (See: Rear Seat Cushion Replacement).
