Aurora V6-214 3.5L VIN H SFI (2001)
3.
Hold the new spring assembly in your right hand and insert one end through the LH hole of the lumbar support yoke bar (4).
4.
Use your left hand to squeeze the top portion of the black lumbar basket (1) and the metal support frame (5) together.
5.
Insert the other end of the new spring assembly up through the oblong opening (3). Let the hook rest over the basket edge.
6.
Remove the old spring assembly by cutting the wire with a pair of diagonal side cutters.
7.
Insert the hook end of the new spring assembly into the round opening (2).
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.