Aurora V6-214 3.5L VIN H SFI (2001)
Brake Hose/Line: Service and Repair
Front
Brake Hose Replacement- Front
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Clean all dirt and foreign material from the brake hose and the brake pipe fittings.
Important: Install a rubber cap or plug to the exposed brake pipe fitting end in order to prevent brake fluid loss and contamination.
4. Disconnect the brake pipe fitting from the brake hose, than cap or plug the brake pipe fitting end.
5. Using a flat-bladed tool, remove the brake hose retainer from the brake hose.
6. Remove the brake hose from the brake hose bracket.