Aurora V6-214 3.5L VIN H SFI (2001)
Parking Brake Cable: Service and Repair
Front (Manual Adjustment System)
Park Brake Cable Replacement- Front (Manual Adjustment System)
Removal Procedure
Important: The front manual adjustment park brake cable is serviced as a separate unit. The front park brake cable has a threaded equalizer rod for
adjustment.
1. Remove the left door carpet retainer.
2. Remove the left closeout insulator panel.
3. Pull the edge of the carpet back enough to access grommet.
4. Loosen the grommet from the floor pan.
5. Raise the vehicle and support. Refer to Vehicle Lifting.
6. Disconnect the park brake cable adjuster from the front cable.
7. Release the retaining tabs holding the front park brake cable housing in the floor pan and push the cable upward.
8. Lower the vehicle.