Aurora V6-214 3.5L VIN H SFI (2001)
Coolant Line/Hose: Service and Repair
Surge Tank Pipe Replacement - Inlet
Surge Tank Pipe Replacement - Inlet
Removal Procedure
1. Partially drain the cooling system.
2. Disconnect the surge tank inlet hose from the surge tank.
3. Remove the fuel injector sight shield.
4. Disconnect the surge tank inlet hose from the engine.
5. Remove the bolt attaching the pipe assembly to the engine.
6. Remove the surge tank inlet pipe assembly.
Installation Procedure
1. Install the surge tank inlet pipe assembly to the engine.