Aurora V6-214 3.5L VIN H SFI (2001)
1. Install the heater core into the HVAC module using the attaching straps and screws.
Tighten
Tighten the screw to 1.4 N.m (12 lb in).
2. Install the heater core cover.
3. Ensuring the seals at the front of dash are in the proper positions, install the heater core cover screws.
Tighten
Tighten the screws to 1.4 N.m (12 lb in).
4. Install the heater core heat shield and screws (1).
Tighten
Tighten the screws to 1.4 N.m (12 lb in).
5. Install the air distributor duct and the left screw (1). Ensure the right tab is seated properly.
Tighten
Tighten the screw to 1.4 N.m (12 lb in).
