Aurora V6-214 3.5L VIN H SFI (2001)
Important: The camshafts must be locked in place using the J 42038 before installation of the secondary timing chain.
15. Make sure the locking tool is fully seated and locked onto the camshafts.
16. Compress the secondary timing chain tensioner shoes with your hand.
17. Lock the tensioner by inserting a piece of wire (2) into the access hole in the side of the tensioner (1).
18. Slowly release pressure on the tensioner shoes. The tensioner should remain compressed.
19. Slide the intake and exhaust camshaft sprockets off of the J 42042 and onto their respective camshafts and align the drive pins (1) in the camshafts.
