Aurora V6-214 3.5L VIN H SFI (2001)
Notice: Use only the spark plug boot special removal tool to remove the spark plug boots. Prying or using regular pliers could damage the boots.
6. Remove the spark plug boots using the J 43094.
7. Disconnect and set aside the engine wiring harness and fuel injector harness from the left camshaft cover retainers.
8. Remove the left camshaft cover retaining bolts.
Important: The left camshaft cover seals (perimeter and spark plug) should be reused unless they are damaged or if the perimeter seal is pulled from
its groove during removal.
9. Lift the left camshaft cover off the left cylinder head evenly.
10. If necessary, disassemble the camshaft cover.
11. Clean and inspect the camshaft cover.
