Aurora V6-214 3.5L VIN H SFI (2001)
7. Push the spark plug boots onto the ignition coil assembly.
8. Install the left ignition coil assembly to the left camshaft cover.
9. Connect the PCV valve and feed tube (1) to the left camshaft cover.
10. Install the oil level indicator tube.
11. Insert the tab of the fuel injector sight shield under the engine bracket.
12. Lower the fuel injector sight shield.
13. Align the holes in the fuel injector sight shield with the studs.
14. Install the 2 fuel injector sight shield nuts onto the studs.
^
Tighten the fuel injector sight shield nuts to 3 Nm (27 inch lbs.).