Aurora V6-214 3.5L VIN H SFI (2001)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley Replacement
Removal Procedure
1. Remove the drive belt.
2. Remove the idler pulley bolt.
3. Remove the idler pulley.
Installation Procedure
1. Install the idler pulley.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the idler pulley bolt.
^
Tighten the idler pulley bolt to 50 Nm (37 ft. lbs.).
3. Install the drive belt.