Aurora V6-214 3.5L VIN H SFI (2001)
8. If replacing the oil pan remove the oil level sensor/switch.
9. Clean and inspect the oil pan.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. If removed install the oil level sensor/switch.
^
Tighten the oil level sensor/switch to 9 Nm (80 inch lbs.).
2. Install a new oil pan gasket.
3. Install the oil pan (2) to the lower crankcase.
4. Loosely install the oil pan retaining bolts.
