Aurora V6-214 3.5L VIN H SFI (2001)
Installation Procedure
Important: Make sure the darkened chain links on the left secondary camshaft drive chain are facing inward.
1. Position the left secondary camshaft drive chain to the left intake camshaft sprocket.
2. Place the left intake camshaft (1) in position in the cylinder head.
3. Position the camshaft lobes in a neutral position with the front notch for the camshaft sprocket drive pins near the top of their rotation and the flats
machined into the camshaft parallel and facing the cylinder head.
4. Observe the markings on the bearing caps. Each bearing cap is marked in order to identify its location. The markings have the following meanings:
^
The raised feature must always be oriented toward the outboard side of the engine.
^
The "I" indicates the intake camshaft.
^
The "E" indicates the exhaust camshaft.
^
The number indicates the journal position from the front of the engine.
5. Apply a liberal amount of lubricant GM P/N 12345501 or equivalent to the camshaft bearing caps.
