Aurora V6-214 3.5L VIN H SFI (2001)
5. Install the two bolts attaching the left exhaust manifold to the right exhaust manifold crossover.
^
Tighten the exhaust manifold crossover bolts to 25 Nm (18 ft. lbs.).
6. Position the exhaust manifold heat shield to the left exhaust manifold.
7. Install the bolts attaching exhaust manifold heat shield to the left exhaust manifold.
^
Tighten the exhaust manifold heat shield bolts to 9 Nm (80 inch lbs.).
8. Install the oil level indicator and tube.
9. Install the engine cooling fans.