Aurora V6-214 3.5L VIN H SFI (2001)
27. Position the accelerator control cable bracket to the throttle body.
28. Install the fasteners attaching the accelerator control cable bracket to the throttle body.
^
Tighten the accelerator control cable bracket bolt to 13 Nm (115 inch lbs.).
^
Tighten the accelerator control cable bracket nuts to 10 Nm (89 inch lbs.).
29. Install the air cleaner assembly.
30. Install the air cleaner intake duct.
Important: The throttle should operate freely without binding between full closed and wide open throttle.
31. Connect the accelerator cable to the throttle body lever and bracket.
32. Connect the cruise control cable (2) to the throttle body lever and bracket.
