Aurora V6-214 3.5L VIN H SFI (2001)
Heat Shield: Service and Repair
Exhaust Manifold Heat Shield Replacement
Exhaust Manifold Heat Shield Replacement
Removal Procedure
Caution: Refer to Hot Exhaust System Caution in Service Precautions.
1. Remove the bolts attaching the exhaust manifold heat shield to the left exhaust manifold.
2. Remove the exhaust manifold heat shield from the left exhaust manifold.
Installation Procedure
1. Position the exhaust manifold heat shield to the left exhaust manifold.
2. Install the bolts attaching the exhaust manifold heat shield to the left exhaust manifold.
^
Tighten the exhaust manifold heat shield bolts to 9 Nm (80 inch lbs.).