Aurora V6-214 3.5L VIN H SFI (2001)
1. Remove the left IP endcap. Refer to IP Endcap Replacement in Instrument Panel, Gauges and Warning Indicators.
2. Remove the sensor by twisting 1/4 turn.
3. Disconnect the electrical connector from the sensor.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the sensor.
2. Install the sensor into the duct and twist to lock in place.
3. Install the left IP endcap. Refer to IP Endcap Replacement in Instrument Panel, Gauges and Warning Indicators.
Air Temperature Sensor Replacement - Lower Left
REMOVAL PROCEDURE
