Aurora V6-214 3.5L VIN H SFI (2001)
4.
Install the IP cluster trim plate to the IP cluster trim pad.
Install the IP cluster trim plate retaining fasteners.
5.
Install the IP driver knee bolster.
5.1.
Align the knee bolster to the IP.
5.2.
Engage the knee bolster retaining clips by pushing the knee bolster forward and up.
5.3.
Install the knee bolster compartment.
6.
Install the center IP trim plate.
6.1.
Align the IP trim plate retaining clips with the holes in the IP.
6.2.
Engage the center IP trim plate retaining clips by pushing the trim plate forward.