oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Disabling|Page 13777 > < Diagram Information and Instructions|Page 13771
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Disabling

IMPORTANT:  Refer to SIR Service Precautions.

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.

IMPORTANT:  With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning lamp illuminates. This is normal
operation, and does not indicate an SIR system malfunction.

4. Remove the SIR fuse from the rear fuse block.
5. Rear fuse block is located under the rear seat.

6. Remove the driver sound insulator.
7. Remove the Connector Position Assurance (CPA) (1) from the driver yellow connector (3) located next to steering column (2).
8. Disconnect the driver frontal air bag yellow connector (4) from the vehicle harness yellow connector (3).

Disabling|Page 13777 > < Diagram Information and Instructions|Page 13771