Aurora V6-214 3.5L VIN H SFI (2001)
9. Connect the driver frontal air bag yellow connector (4) to the vehicle harness yellow connector (3) located next to steering column (2).
10. Install the connector position assurance (CPA) (1) to the driver yellow connector (3).
11. Install the driver sound insulator.
12. Rear fuse block is located under the rear seat.
13. Install the SIR fuse to the rear fuse block.
14. Staying well away from all air bags, turn the ignition switch to the ON position.
14.1. The AIR BAG warning lamp will flash 7 times.
14.2. The AIR BAG warning lamp will then turn OFF.
15. Perform the SIR Diagnostic System Check if the AIR BAG warning lamp does not operate as described. Refer to Diagnostic System Check - SIR.
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System Check
