Aurora V6-214 3.5L VIN H SFI (2001)
Backup Lamp: Service and Repair
BACKUP LAMP BULB REPLACEMENT
REMOVAL PROCEDURE
1. Open the compartment lid.
2. Remove the appropriate side trim panel. Refer to Compartment Trim Panel Replacement - Rear in Trunk/Liftgate.
3. Remove the tail lamp assembly (3). Refer to Taillamp Replacement.
4. Twist the back up bulb socket counter clockwise 1/4 turn to remove the socket from the tail lamp assembly (3).
5. Remove the back up bulb from the socket.
INSTALLATION PROCEDURE
1. Install the backup lamp bulb into the socket.
2. Twist the backup bulb socket clockwise 1/4 turn in order to install the socket into the tail lamp assembly (3).
3. Install the tail lamp assembly (3). Refer to Taillamp Replacement.
4. Install the side trim panel. Refer to Compartment Trim Panel Replacement - Rear in Trunk/Liftgate.