Aurora V6-214 3.5L VIN H SFI (2001)
License Plate Lamp: Service and Repair
REMOVAL PROCEDURE
1. Remove the fasteners (3) securing the license lamp housing (1) to the compartment lid.
2. Remove the license lamp housing (1) from the rear compartment lid.
3. Remove the license lamp bulb socket (2) from the license lamp housing (1) by turning 1/4 turn counter clockwise.
INSTALLATION PROCEDURE
1. Install the license lamp bulb socket (2) into the license lamp housing (1) by turning 1/4 turn clockwise to secure.
2. Position the license lamp housing (1) into the rear compartment lid.
3. Install the license lamp housing fasteners (3) in order to secure the license lamp housing (1) to the rear compartment lid.
