Aurora V6-214 3.5L VIN H SFI (2001)
Alignment: Service and Repair
Rear Wheel Alignment
Rear Toe Adjustment
Important: Complete the left and right rear toe adjustments separately, per wheel. Use the following procedure.
1. Loosen the inner adjustment link cam nut.
Notice: Refer to Fastener Notice in Service Precautions.
2. In order to adjust the toe, rotate the cam bolt using an 18 mm socket.
-
Tighten the cam (2) nut to 75 Nm (55 ft. lbs.).
3. Recheck the toe setting after tightening.
4. Readjust the toe setting if necessary.