Aurora V6-214 3.5L VIN H SFI (2001)
Power Steering Line/Hose: Customer Interest
Steering - Moan/Squawk Noise On Low Speed Turns
File In Section: 02 - Steering
Bulletin No.: 02-02-32-002
Date: January, 2002
TECHNICAL
Subject:
Moan/Squawk Noise During Low Speed Turning Maneuvers
(Replace Power Steering Gear or Pressure Hose Assembly)
Models:
2001-2002 Oldsmobile Aurora
with 3.5L V6 or 4.0L V8 Engine (VINs H, 6 - RPOs LX 5, L47)
Built Prior to the VIN Breakpoints shown.
Condition
Some owners may comment on an audible moan/squawk type noise that is heard during low speed turning maneuvers.
Cause
This condition may be caused by instability of the power steering gear valve. This may result in a pressure disturbance that creates an audible noise that
is transferred through the vehicle structure.
Correction
Based on the engine type indicated below, replace either the power steering gear or the power steering pressure hose with the components indicated.
4.0L V8 Engine (RPO L47) Built Prior to VIN Breakpoint 24100112
Install a new power steering pressure hose, P/N 25737839, and secure the clip of the new hose to the frame with new screw, P/N 11515764, using the
hole in the frame where the existing clip had been installed. The clip is to be positioned in a fore-aft direction with the hoop of the clip pointing forward
and the attaching screw tightened to 7 N.m (60 lb in).
To ensure the proper installation, refer to Power Steering Pressure Hose Replacement (L47) in the Power Steering System sub-section of the Service
Manual (SI2000 Document ID # 628527).
3.5L V6 Engine (RPO LX5) Built Prior to VIN Breakpoint 24131699
Install new power steering gear, P/N 26098941. To ensure the proper installation, refer to Power Steering Gear Replacement in the Power Steering
System sub-section of the Service Manual (SI2000 Document ID # 620339).
Parts Information
Parts are currently available from GMSPO.
Warranty Information
