oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Idle Air Control Motor (IAC) <--> [Idle Speed/Throttle Actuator - Electronic] > < Fuel Tank Pressure Sensor|Diagrams|Page 4946
Page 2
background image

1. Install the fuel tank pressure sensor.
2. Connect the fuel tank pressure sensor electrical connector.

3. Install the fuel sender access panel.

NOTE:  Refer to Fastener Notice in Service Precautions.

4. Install the fuel sender access panel bolts.

Tighten
Tighten the fuel sender access panel bolts to 2 N.m (18 lb in).

5. Install the rear compartment floor trim.

Idle Air Control Motor (IAC) <--> [Idle Speed/Throttle Actuator - Electronic] > < Fuel Tank Pressure Sensor|Diagrams|Page 4946