Aurora V6-214 3.5L VIN H SFI (2001)
5. Loosen the retaining screw (2) for the air cleaner cover.
6. Remove the air cleaner cover (1) and lift the PCM (3) from the housing assembly.
7. Disconnect the harness connectors (2) from the PCM (1).
8. Remove the PCM from the engine compartment.
Installation Procedure
NOTE: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints,
lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping
force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts
and systems.