Aurora V6-214 3.5L VIN H SFI (2001)
Manifold Absolute Pressure (MAP) Sensor: Service and Repair
MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the mounting nuts (2) from the injector sight shield.
2. Lift the injector sight shield off the mounting studs by lifting at the front (4) of the cover.
3. Remove the MAP sensor (1) from the intake manifold.
4. Disconnect the electrical connector from the MAP sensor.
5. Inspect the MAP sensor grommet for wear or damage, and replace as needed.
INSTALLATION PROCEDURE