Aurora V6-214 3.5L VIN H SFI (2001)
Air Injection Pump: Service and Repair
Secondary Air Injection (AIR) Pump Replacement
REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the fasteners from the front portion of the splash shield in the left front wheel well. Refer to Wheelhouse Panel Replacement in body front
end.
3. Reposition the splash shield in order to gain access to the pump and bracket assembly.
4. Compress the pinch clamp and remove the outlet hose from the pump (3).
5. Remove the inlet hose from the pump.
6. Remove the pump fasteners.
7. Reposition pump to gain access to the electrical connector.
8. Disconnect the pump electrical connector
9. Remove the pump from the vehicle.