oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure (MAP) Sensor Diagnosis|Page 4264 > < Manifold Absolute Pressure (MAP) Sensor Diagnosis|Page 4262

Aurora V6-214 3.5L VIN H SFI (2001)

Page 1
background image

Manifold Absolute Pressure (MAP) Sensor: Service and Repair

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REPLACEMENT

REMOVAL PROCEDURE

1. Remove the mounting nuts (2) from the injector sight shield.
2. Lift the injector sight shield off the mounting studs by lifting at the front (4) of the cover.

3. Remove the MAP sensor (1) from the intake manifold.
4. Disconnect the electrical connector from the MAP sensor.
5. Inspect the MAP sensor grommet for wear or damage, and replace as needed.

INSTALLATION PROCEDURE

Manifold Absolute Pressure (MAP) Sensor Diagnosis|Page 4264 > < Manifold Absolute Pressure (MAP) Sensor Diagnosis|Page 4262