Aurora V6-214 3.5L VIN H SFI (2001)
1. Install the new O-ring (6) onto the TP sensor (5).
2. Install the TP sensor (5) on to the throttle body (7).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the 2 TP sensor screws.
Tighten
Tighten the screws to 2.3 N.m (20 lb in).
4. Install the electrical connector (3) to the TP sensor (2).
5. Install the EGR valve. Refer to Exhaust Gas Recirculation (EGR) Valve Replacement