oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 4635 > < Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 4633
Page 1
background image

Air Filter Element: Service and Repair

AIR CLEANER ELEMENT REPLACEMENT

REMOVAL PROCEDURE

1. Disconnect the IAT sensor electrical connector (2).

2. Remove the air cleaner intake duct.
3. Loosen the retaining screws on the air cleaner cover.
4. Remove the housing cover and remove the air cleaner element.
5. Inspect the housing cover, the seal assembly, and the air cleaner duct for damage. If a problem is found, replace as necessary.

INSTALLATION PROCEDURE

Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 4635 > < Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 4633