Aurora V6-214 3.5L VIN H SFI (2001)
1. Connect the horn ground lead (2) into the lower left threaded hole in the steering wheel.
2. Connect the horn contact lead into the steering column cam tower.
3. Rotate the horn contact 1/4 turn clockwise to lock.
4. Connect the steering wheel module electrical connector and CPA (4).
IMPORTANT: If vehicle is equipped with dual stage air bags then there will be 2 connectors, match the right color connector to the right color
opening in module. Route the steering wheel module wires, the redundant control wires, and the horn wires correctly.
5. Align the steering wheel module fasteners to the steering column fastener holes.
6. Push the steering wheel module firmly into the steering column in order that the fasteners engage.
IMPORTANT: After replacing a deployed or undeployed dual stage inflator module, correct disposal is required. A deployed dual stage inflator
module must be energized to ensure that both stages are no longer active. Refer to Inflator Module Handling and Scrapping for proper disposal.
7. Enable the SIR system.
Inflatable Restraint Side Impact Module Replacement - Front
REMOVAL PROCEDURE
CAUTION: Refer to SIR Inflator Module Handling And Storage Caution in Service Precautions.
1. Disable the SIR system.
2. Move the seat to the full forward position.
