Aurora V6-214 3.5L VIN H SFI (2001)
11. Inspect the J 38826 and the appropriate pigtail adapter for damage. Replace as needed.
12. Short the 2 SIR deployment harness leads (1) together using one banana plug seated into the other.
IMPORTANT: Refer to Tools Required list for the correct adapter.
13. Connect the appropriate pigtail adapter (2) to the SIR deployment harness (1).
14. Extend the SIR deployment harness and adapter to full length from the deployment fixture.
IMPORTANT: On the steering wheel dual stage inflator module both connectors must be attached to the deployment harness adapter. This will
ensure that both stage 1 and stage 2 of the deployment loops are energized, regardless of the deployment state.
