Aurora V6-214 3.5L VIN H SFI (2001)
9. Remove the SDM mounting fasteners (1).
10. Remove the SDM (2) from the console floor (3).
INSTALLATION PROCEDURE
1. Install the SDM (2) to console floor (3).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the SDM mounting fasteners (1).
Tighten
Tighten fasteners to 9 N.m (80 lb in).
3. Connect the SDM wiring harness connector (3) to the SDM (2).
4. Install push-on clip (1) securing SDM wiring harness to console stud.