Aurora V6-214 3.5L VIN H SFI (2001)
Seat Belt Buckle: Service and Repair
Rear
REMOVAL PROCEDURE
NOTE: Refer to Servicing and Replacing Seat Belts Notice in Service Precautions.
1. Remove the rear seat cushion.
2. Remove the rear seat belt buckle anchor fasteners.
3. Slide the rear seat belt buckle anchor plate out from under the rear seat back hold-down.
4. Remove the rear seat belt buckles.
INSTALLATION PROCEDURE
1. Install the rear seat belt buckle anchor plate under the rear seat back hold-down.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Assure that the fastener threads and fastener hole are free of any sealer patch material.
2. Install the rear seat belt buckle anchor fasteners.
Tighten
Tighten the rear seat belt buckle anchor fasteners to 41 N.m (32 lb ft).
3. Insert the seat belt buckles into the seat back pockets.