Aurora V6-214 3.5L VIN H SFI (2001)
1. From the rear compartment, feed the rear seat center shoulder belt and escutcheon through opening in the rear shelf trim panel.
2. Install the retractor to the cross brace.
3. Carefully lift upward on the rear shelf trim panel.
NOTE: Refer to Fastener Notice in Service Precautions.
4. From inside the vehicle, install the rear seat center shoulder retractor fastener (2).
Tighten
Tighten the rear seat center shoulder belt retractor fastener (2) to 30 N.m (22 lb ft).
5. Install the push-in fastener (1) in order to secure the rear shelf trim panel.
6. Install the rear seat center belt escutcheon to the rear shelf opening.
