Aurora V6-214 3.5L VIN H SFI (2001)
Power Seat Motor Position Sensor: Service and Repair
Front Seat Recliner Position Sensor Replacement
Removal Procedure
Caution: Refer to SIR Handling Caution in Cautions and Notices.
1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
2. Remove the front seat. Refer to Bucket Seat Replacement (See: Body and Frame/Seats/Service and Repair/Bucket Seat Replacement).
3. Partially remove the seat back cover and pad in order to gain access to the power recliner motor and power recliner sensor. Refer to Driver or
Passenger Seat Back Cushion Cover and Pad Replacement (See: Body and Frame/Seats/Seat Cover/Service and Repair/Driver or Passenger Seat
Back Cushion Cover and Pad Replacement).
Notice: Refer to Electrical Wiring Routing Notice (See: Service Precautions/Vehicle Damage Warnings/Electrical Wiring Routing Notice) in
Cautions and Notices.
4. Disconnect the electrical connector on the power recliner sensor (5).
5. Remove the push-on nut (6) on the end of the recliner rod (2).
6. Slide the recliner rod (2) out of the seat back recliner and the power recliner motor (4) far enough to clear the sensor (5).
7. Remove the power recliner position sensor (5) from the motor (4).
Installation Procedure
1. Install the power recliner position sensor (5) to the motor (4).
2. Slide the recliner rod through the power recliner position sensor (5) the seat back recliner motor (4), and the recliner assembly.
3. Install a new push on nut (6) to the end of the recliner rod (2).
4. Connect the electrical connector to the power recliner position sensor (5).
5. Install the seat back cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement (See: Body and
Frame/Seats/Seat Cover/Service and Repair/Driver or Passenger Seat Back Cushion Cover and Pad Replacement).
6. Install the front seat. Refer to Bucket Seat Replacement (See: Body and Frame/Seats/Service and Repair/Bucket Seat Replacement)
7. Enable the SIR system. Refer to Enabling the SIR System in SIR.
