Aurora V6-214 3.5L VIN H SFI (2001)
1. Carefully install the fluid pressure manual valve position switch. Handle the switch carefully, the fluid pressure manual valve position switch is
very delicate.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the control valve body bolts (375, 379 and 381) that mount the fluid pressure manual valve position switch to the control valve body (300).
^
Tighten the control valve body bolt (375) to 12 Nm (106 inch lbs.).
^
Tighten the control valve body bolt (379) to 12 Nm (106 inch lbs.).
^
Tighten the control valve body bolt (381) to 8 Nm (70 inch lbs.).
3. Connect the transaxle wiring harness.
4. Install the case side cover.
