Aurora V6-214 3.5L VIN H SFI (2001)
Power Steering Pump: Service and Repair
Pulley Removal and Installation
-
Tools Required
-
J25034-C Pulley Remover
-
J25033-C Pulley Installer
Removal Procedure
1. Remove the drive belt.
2. Install J25034-C to the power steering pulley.
3. Using J25034-C remove the power steering pump pulley.
Installation Procedure
1. Install the power steering pulley to the power steering pump using J25033-C.
2. Ensure that the axial tolerance of the power steering pulley on the power steering pump is within 0.25 mm (0.010 inch).