Aurora V6-214 3.5L VIN H SFI (2001)
Steering Wheel: Service and Repair
Steering Wheel Replacement
Steering Wheel Replacement
-
Tools Required
-
J42578 Steering Wheel Puller Legs
-
J1859-A Steering Wheel Puller
Removal Procedure
1. Disable the SIR system. Refer to Disabling the SIR System in Restraint Systems.
2. Remove the Inflatable Restraint Steering Wheel Module. Refer to Inflatable Restraint Steering Wheel Module Replacement in Restraint Systems.
3. Remove the steering wheel mass damper retaining screws.
4. Remove the mass damper from the steering wheel.
5. Remove the steering wheel retaining nut.
6. Note the mark on the steering shaft and the steering wheel in order to ensure proper alignment during installation.
7. Use the J42578 and the J1859-A in order to remove the steering wheel.
8. Remove the J42578 and the J1859-A from the steering wheel.
Installation Procedure