Aurora V6-214 3.5L VIN H SFI (2001)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
1. Place the transmission range control in PARK (P).
2. Remove the left closeout insulator panel.
3. Loosen the left front carpet to allow access to the park lock cable routing
Important Do not attempt to perform this step with the ignition key in any other position except RUN.
4. Remove the four steering column bolts and lower the steering column.
5. Turn the ignition key to RUN position.
6. Slip a flat head screwdriver blade into the slot provided in the ignition switch inhibitor. Depress the able latch and pull the park lock cable from
the inhibitor.
7. Remove the radio and console trim plates.
8. Remove the park lock cable at the transmission range control assembly.
9. Remove the park lock cable from the vehicle.
Installation Procedure