Aurora V6-214 3.5L VIN H SFI (2001)
Back Window Glass: Service and Repair
Rear Window Replacement
Tools Required
*
J 24402-A Glass Sealant (Cold Knife) Remover
*
J 39032 Stationary Glass Removal Tool
*
Urethane Adhesive Kit GM P/N 12346392 or Equivalent
*
Isopropyl Alcohol or Equivalent
*
Cartridge-type Caulking Gun
*
Commercial-type Utility Knife
*
Razor Blade Scraper
*
Suction Cups
*
Plastic Paddle
Removal Procedure
Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces
and inner trim of the window.
1. Open the rear compartment lid in order to access the reveal molding.
2. Remove the rear window reveal molding (1).
3. Remove the upper interior quarter trim. Refer to Quarter Upper Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair/Quarter Upper Trim Panel Replacement) in Interior Trim.
4. Disconnect the rear window electrical connectors
5. Disconnect the OnStar(R) antenna. Refer to Mobile Telephone Antenna Replacement in Cellular Communication.
6. Disconnect the antenna connection from the rear window.
Caution: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to
reduce the chance of personal injury.
7. Use safety glasses and gloves.